DIN22101 STANDARD ABRASION RESISTANT EP 500/4 FABRIC HEAT RESISTANT RUBBER CONVEYOR BELT MOULDED EDGE
Huayue Advantage
1. Plies: 1-10ply
2: width: 400-2200mm
3. Thickness: 4-30mm
4. Working Temperature : 0 - 800C
5. Abrasion resistant & High Tensile Strength
6. ISO9001:2008, Bureau Veritas Certificate.
7. More Than 30 years professional experience.(Since 1982)
8. International Standard: DIN, BS, AS, RMA, AS, JISK, SANS etc
Application Environment
Heat resistant conveyor belt is mainly used to transport high temperature materials, such as sintering ore, hot coke, clinker, hot casting and so on. According to the manifestation of the heat resistant belt breakage until to lose transportation ability and the heat resistant grading, we use EPDM or SBR as the covering layer rubber, and high modulus low shrinkage polyester or cotton canvas as the strong layer. It can use the heat resistant woven glass fabric between the cover rubber and the layers, so as to improve the working life of the heat resistant conveyor belt. We can make it into endless conveyor belt as per the clients’ requirements.
Specifications:
Item | Detail | Class | |||
T1 | T2 | T3 | T4 | ||
Test temperature | |||||
≤100°C | ≤125°C | ≤150°C | ≤175°C | ||
Change range allowed | |||||
Hardness | Difference before and after aging(IRHD) | 20 | 20 | ±20 | ±20 |
Maximum value after aging(IRHD) | 85 | 85 | 85 | 85 | |
Tensile Strength | Change rate after aging/% | -25 | -30 | -40 | -40 |
Minimum value after aging/MPa | 12 | 10 | 5 | 5 | |
Breaking Elongation | Change rate after aging/% | -50 | -50 | -55 | -55 |
Minimum value after aging/% | 200 | 200 | 180 | 180 | |
Standard Of Conveyor belt:DIN, BS, AS, RMA, AS, JISK, SABS etc | |||||
The physical and mechanical properties of the heat resistant covering layer after tested should be in accordance with the following table:
| Project | The type | ||||
| T1 | T2 | T3 | T4 | ||
| Change the range | |||||
| Hardness | Difference before and after ageing (IRHD) | +20 | +20 | +20 | +20 |
| Max. Value after ageing (IRHD) | 85 | ||||
| Tensile strength | Min. value after ageing Mpa | 12 | 10 | 5 | 5 |
| variable rate in performance <= | -25 | -30 | -40 | -40 | |
| Break at elongation | variable rate in performance% <= | -50 | -50 | -55 | -55 |
| Min. value after ageing /% | 200 | 200 | 180 | 180 | |
Type Item level | Abrasive wear | ||
type I | type II | type III | |
First quality | 0.8 | 1.0 | 1.0 |
accepts | 1.0 | 1.2 | 1.2 |
Item | interlayer of cloth | cover layer and cloth interlayer | |
Thickness of the cover layer≤1.5mm | Thickness of the cover layer>1.5mm | ||
The average value of the longitudinal specimen shall be no less than | 3.0 | 2.2 | 2.6 |
The peak value of the longitudinal specimen | 2.0 | 1.6 | 2.0 |
Nylon conveyor belt, (NN)
Cotton conveyor belt, (CC)
Sidewall conveyor belt (SW)
Steel Cord conveyor belt ( ST )
Chevron conveyor belt, (C5 C10 and C15)
Oil Resistance conveyor belt, (OR and MOR)
Hot Resistance conveyor belt, (HR)
Fire Resistance conveyor belt, (FR/PVC/PVG)
Heat Resistance conveyor belt, (HR/ FR)
Cold Resistance conveyor belts, (CR)
Pattern conveyor belt ( 30+ Moulds)
Metal Mesh conveyor belt (Heat resistant temp until 800c)
Endless belts
Conveyor roller, idler
Conveyor Pulley, frame,bracket etc
Call Us
| 100% Response Rate | |
|
5,000+ for 1 Transactions
The supplier’s transactions conducted via Alibaba.com in the past 6 months.
|